Let us discuss about Fibreglass bodykit and Poly-Urethane(PU) bodykit..

1)ADVANTAGES AND DISADVANTAGES..
2)PRICE..
3)YOUR EXPERIENCES..
4)OPINIONS..

Mari kita menghangatkan topic ini..MANTAP!!?!! 8)

Let me start first..MANTAP!!?!!


Fibreglass Vs. Poly-Urethane (PU)

Fibreglass
1)Limited flexibility
2)Easy to customise/modify
3)Rigid
4)Cheaper
5)Fitment - EASY
6)Repairs are durable and permanent
7)Can be re-shaped for any application
8)Will not absorb hits
9)Once cracked, easily repaired
10)No wave or distortion in hot climates

Poly-Urethane (PU)
1)Flexible
2)Difficult to modify
3)Not rigid
4)More costly
5)Fitment - some degree of difficulty
6)Repairs are not long-term
7)Cannot re-work or re-shape
8)Will absorb small hits
9)Once cracked, impossible to repair well
10)Possibility of waviness or distortion in hot climates


Please note that the above information is for general guidance only.

Rekemen pakai PU dari fiber... kalau stakat spoiler pakai fiber pun dah ok.. cuma untuk skirting, bumper side skirt seelok2nya guna PU.. sebab fiber mudah pecah kalau terkene batu.. dari segi harga PU lebih mahal dari Fiber.. dah PU ni tahan lebih lama.. just my 2 cents

dari perkataan lain, sebagai contoh

HONDA = part mahal tapi tahan lama
PROTON = part murah tapi tak tahan lama

PU = Tahan pecah tapi susah repair
FIBER = Mudah pecah tapi senang repair


PU pecah pun kalau accident yang serius atau laju-laju langgar batu, kalau driver yang cermat, langgar sikit sikit, ok lagi calar saja. Jadi luka tak ketara

Kalau fiber, sakit kepala, langgar sikit saja retak sudah. kalau mahu tahan kena pakai 2 lapis fiber, terus kereta jadi berat, kalau langgar memang tak pecah, tapi bahagian luar pecah, kena selalu spray paint. kalau tidak, luka jadi ketara pula.

Anyone..add more info here about fibre and PU..

Then everyone can learn and gain more knowledge bout this stuff..MANTAP!!?!!

Thanx

ndak pula siurang pena dingar pasal PU ni..ketinggalan zaman sdh siurang ni..tp mcm Tue PU lg mantap dri fiber

tapi PU tak boleh mod bentuk, itu masalahnya. tapi tahan lah

kalau campur dua-dua tu boleh tak..??

rasa-rasanya bole campur2. tapi ikut selera masing2 bah tu.

macam banyak kerja kalau tak silap...

boleh kah campur?? lain nanti kejadiannya tue..

hmmm...fibre dapat disign apa yg ko suka...PU...kurang pasti lar..sokong fibre!!

PU!!! sokong PU!!! wakakaka

As drakult mentioned before, every part has its own pros and cons. If your modding is more to extreme looks or different to others, fibreglass is your choice. Modding ur car into JDM style or other originality looks. PU would be preferable.

i agree wit tht.....

mana yg mahal? bukan PU ka?

nic961 wrote:

hmmm...fibre dapat disign apa yg ko suka...PU...kurang pasti lar..sokong fibre!!

bagus u sokong $$$ dulu la baru fiber...hehe

pu lebih mahal boss~

PU memang mahal..

saya baru beli 2nd hand pu eg6 bumper, rm300 sama kawan. tilijia rm600 oh~

drakult wrote:

PU memang mahal..

mahal tapi bagus!!

iya bah memang bagus klu nda mau tambah design lagi..

tapi klu jenis yg mau tukar2 design..baik guna fibre..hehehe

fiber ni kalao balik2 pecah pocket pun kering nanti...

itulah klu main fibre nie kena ready mental dan duit..hahaha..

jgn bawa laju ok bah juga tue..

Top Speed 30 - 70 km/h jk..

alamak....susah la kalo mau racing...hahaha...